banner



How To Create Vpn Server In Windows Server 2016

In this tutorial you will notice stride past instructions to setup a PPTP VPN Server 2016, in order to access your local network resources from anywhere in the world. So, if you have a Windows 2016 server with i network card and you desire to setup a VPN connection in order to connect and access server or network files from everywhere, proceed reading below…*

* Note: If you lot desire to setup a more secure VPN Server for your network, then read this article: How to Setup L2TP VPN Server 2016 with a Custom Preshared Central for Hallmark.

How to Install a PPTP VPN Server 2016 (With only One NIC).

To install and configure the Server 2016 to act every bit a PPTP VPN access server follow the steps below:

Stride i. Install the Routing and Remote Access Role on Server 2016.
Step 2. Enable the Routing and Remote Admission on Server 2016.
Step 3. Configure VPN Server Settings (Security, IP Range, etc.).
Stride four. Allow Routing and Remote Access Inbound Traffic in Windows Firewall.
Step 5. Select the VPN Users.
Step 6. Configure the VPN Server to Allow the Network Access.
Step 7. Configure Isp's Firewall to Allow the PPTP Connections.
Step eight. Setup the PPTP Connection on Clients.

.

Footstep ane. How to Add Remote Admission (VPN Access) Office on a Server 2016.

The first step to setup a Windows Server 2016, equally a VPN server is to add together the Remote Access function to your Server 2016. *

* Info: For this instance we're going to setup VPN on a Windows Server 2016 machine, named "Srv1" and with IP Address "192.168.1.8".

1. To install VPN role on Windows Server 2016, open up 'Server Manager' and click on Add Roles and Features.

Setup VPN Server 2016

ii. At the starting time screen of 'Add Roles and Features wizard', get out the Role-based or characteristic-based installation option and click Next.

clip_image008

iii. At the next screen, leave the default option "Select server from the server pool" and click Next.

image

4. And then select the Remote Access part and click Side by side.

install VPN Server 2016

5. At 'Features' screen leave the default settings and click Side by side.

image

6. At 'Remote Access' information screen, click Next.

clip_image016

7. At 'Remote Services', choose the Directly Admission and VPN (RAS) office services and then click Adjacent.

clip_image020

8. Then click Add Features.

image

nine. Click Next once again.

image

10. Go out the default settings and click Next (twice) at 'Web Server Role (IIS)' and 'Role Services' screens.

image

eleven. At 'Confirmation' screen, select Restart the destination server automatically (if required) and click Install.

clip_image022

12. At the concluding screen, ensure that the installation of the Remote Admission office is successful and Close the magician.

clip_image024

thirteen. Then (from Server Manager) Tools card, click on Remote Access Management.
fourteen.
Select Direct Access and VPN on the left and then click to Run the Getting Started Wizard.

image

15. Then click Deploy VPN but.

image

16. Continue to pace-2 below to configure Routing and Remote Admission.

Step ii. How to Configure and Enable Routing and Remote Admission on Server 2016.

The adjacent step is to enable and configure the VPN access on our Server 2016. To practice that:

1. Right click on the Server's name and select Configure and Enable Routing and Remote Access. *

* Note: You tin can also launch Routing and Remote Access settings, by using the following way:

one. Open Server Managing director and from Tools menu, select Estimator Management.
2. Expand Services and Applications
3. Right click on Routing and Remote Access and select Configure and Enable Routing and Remote Access.

Configure PPTP VPN Server 2016

2. Click Next at 'Routing and Remote Access Server Setup Sorcerer'.

image

3. Choose Custom configuration and click Next.

clip_image030

four. Select VPN access only in this case and click Next.

clip_image032

5. Finally click End. *

* Note: If y'all receive an error says " Remote Admission Service in unable to enable Routing and Remote Access ports in Windows Firewall…", ignore it and click OK to go along.

How to Setup VPN Server on Windows Server 2016

6. When prompted to Start the service click Get-go.

image

Pace 3. Configure VPN Server Settings (Security, IP Range, etc.)

one. At Routing and Remote access panel, right click on your server's name and select Properties.

image

2a. At 'Security' tab, select the Windows Authentication as the Authentication Provider. and then click the Authentication Methods button.

Configure PPTP VPN Server Authentication Methods

2b. Brand sure that the Microsoft encrypted authentication version 2 (MS-CHAP v2) is selected and then click OK.

image

3a. Now select the IPv4 tab, choose the Static accost puddle pick and click Add.

image

3b. Now type the IP Address Range that volition be assigned to VPN clients and click OK twice to close all windows.

e.g. For this example we're going to use the IP address range: 192.168.1.200 – 192.168.ane.209.

image

Step iv. Allow Routing and Remote Access Entering Traffic in Windows Firewall

1. Go To Control Console > All Command Console Items > Windows Firewall.
2. Click Advanced settings on the left.

Allow PPTP in Windows Firewall

3. Select Inbound Rules on the left.
4a. At the correct pane, double click at Routing and Remote Access (PPTP-In)

Allow PPTP Connections in Windows Firewall

4b. At 'General' tab, choose Enabled, Allow the connection and click OK.

image

5a. Then double click at Routing and Remote Access (GRE-In).

image

5b. At General tab, choose Enabled, Let the connection and click OK.

image

vi. Close the Firewall settings and restart your server.

Step five. How to Select which users will have VPN Access.

Now it's time to specify which users will be able to connect to the VPN server (Punch-IN permissions).

1. Open up Server Managing director.
2. From Tools menu, select Active Directory Users and Computers. *

* Note: If your server doesn't belong to a domain, then go to Computer Management -> Local Users and Groups.

Transfer Operation Masters Role to Server 2016.

3. Select Users and double click on the user that you want to allow the VPN Access.
4. Select the Dial-in tab and select Permit admission. Then click OK.

image

Pace half-dozen. How to Configure the Network Policy Server to Allow the Network Access.

In lodge to allow the VPN users to admission the network through the VPN connectedness, go along and alter the Network Policy Server as follows:

image

2. Under the NPS (Local) select Network Policies on the left.

3a. Double click at Connections to Microsoft Routing and Remote Access server policy.

image

3b. At the 'Overview' tab, select the following settings and click OK:

    • Grant access: If the connection request matches this policy.
    • Remote Access Server (VPN-Dial upwardly)

image

4a. Now open up the Connections to other access servers policy, select the same settings and click OK.

    • Grant access: If the connection asking matches this
      policy.
    • Remote Access Server (VPN-Dial
      up)

image

v. Close the Network Policy Server settings.

image

Step seven. How to Configure Firewall to Allow PPTP VPN Access (Port Forwarding).

The adjacent step is allow the PPTP VPN connections on your ISP'southward Router/Firewall.

ane. At the acme of our browser type your router'south IP address: (east.g. "http://192.168.1.1" in this example) and login to router's web interface.

two. Inside the Router configuration setup, forward the port 1723 to the IP accost of the VPN Server. (Come across your Router's manual on how to configure Port Forwards). *

  • For instance, if your VPN Server has the IP address "192.168.1.8" then yous have to forrad the port 1723 to the IP "192.168.i.8".

image

Stride 8. How to Setup the PPTP VPN Connection on CLIENTS *

* Notes & Additional Help:
1. In order to be able to connect to your VPN server from a distance y'all have to know the public IP Address of the VPN server. To observe the pubic IP Address navigate to this link: http://world wide web.whatismyip.com/ (from VPN Server 2016).
ii. To ensure that you tin can always connect to your VPN server information technology is improve to have a Static Public IP Address. To obtain a Static Public IP Address you must contact your internet service provider. If yous don't want to pay for a static IP Address, then you can setup a free Dynamic DNS service (due east.g. no-ip .) on your router'due south (VPN Server) side.

To setup a PPTP VPN Connection on Windows 10:

i. From Settings image click Network and Internet, OR, correct click at the Network icon on the taskbar and choose Open Network & Internet settings.

vpn client setup windows 10

ii. Click VPN on the left and and so click + to Add a VPN connection.

How to Setup a VPN Connection Windows 10

3. At the side by side screen, fill out the following information and click Salvage:

a. VPN provider: Select Windows (born).

b. Connectedness name: Blazon a friendly name for the VPN connexion. (e.g.. "VPN_OFFICE")

c. Server proper noun or accost: Blazon the VPN's server host name or the public IP accost or the VPN server.

d. VPN Type: Use the drop downward arrow to select the type of the VPN connection that your company uses. {e.g. "Betoken to Point Tunneling Protocol (PPTP)"}.

e. Type of sign-in info: Use the drop down arrow and select the authentication type for the VPN connection. (east.g. "User proper noun and password").

f. User Name: Blazon the VPN user name.

g. Countersign: Blazon the VPN password.

h. Check the "Remember my sign-in info" checkbox, if you want to save your sign-in credentials for the VPN connexion and then click Salve

vpn setup windows 10

four. Under Related settings, choose Change adapter options.

vpn connection settings windows 10

5. Right click on the VPN connectedness and cull Properties.

vpn properties windows 10

six. At Security Tab, select Allow these protocols, and check the following protocols:

    • Challenge Handshake Authentication Protocol (CHAP)
    • Microsoft CHAP Version 2 (MS-SHAP v2)

image

7. At Networking tab, select the Net Protocol Version iv (TCP/IPv4) and click Properties.

vpn networking properties

7a. Click Advanced.

use default gateway on local network

7b. Uncheck the "Use default gateway on remote network" and click OK iii (3) times to apply changes and close all windows.

use default gateway on remote network

8. Now you lot're ready to connect to your VPN Server 2016.

windows 10 vpn setup

That's it! Let me know if this guide has helped you lot by leaving your comment about your feel. Please like and share this guide to help others.

If this article was useful for you, please consider supporting us by making a donation. Even $1 tin can a make a huge difference for united states in our effort to go along to assistance others while keeping this site free:

Source: https://www.wintips.org/how-to-setup-vpn-server-on-windows-server-2016-pptp/

Posted by: ungercaresind.blogspot.com

0 Response to "How To Create Vpn Server In Windows Server 2016"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel